Do these splitters require jack point reinforcement or spacers?

Check your vehicle's jack point location against the splitter profile before installation. If the splitter panel sits close to the lift point, you may need to verify clearance or use a reinforcement plate. Measure twice before drilling or bolting down the assembly.

What prep work is needed before paint?

Sand the surface with medium-grit abrasive to ensure paint adhesion, then clean off dust. Fill any minor voids with polyester filler if needed, sand again, and wipe down. Your chosen paint system (urethane, acrylic, or equivalent) will bond properly to a clean, sanded FRP surface.

Can I install these without drilling into the body?

Universal fitment splitters typically require fastening at contact points — usually bolts through existing holes or new drilling. Test-fit the pieces on your vehicle first to confirm mounting location, then decide between bolt-on and adhesive-backed methods based on your panel design and body construction.