Nuke Performance Full-Flow PTFE Hose End Coupling. Available in AN-6, AN-8, AN-10 and AN-12. High quality, lightweight, full flow hoses for PTFE lined fuel lines.
Nuke Performance offers a wide range of hose ends. With the PTFE range, you get a perfect solution for all types of fuel, including alcoholic fuels such as ethanol.

• Safe for all types of fuel, including ethanol
• For Nuke Performance Full-Flow PTFE Fuel Hose
• Available in AN-6 / AN-8 / AN-10 / AN-12
• Straight / 30 / 45 / 60 / 90 / 120 / 150 / 180 degrees
• Aluminum olive insert included with all hose ends
• Much longer life than a standard fuel hose

The wide selection of hose ends from Nuke Performance are of the highest quality possible and available in AN-6 to AN-12 sizes and in a variety of straight to 180-degree versions. The Full-Flow PTFE Fuel Line acts as cheap insurance for your injectors, filters and fuel pumps.

• Black Nylon Braided PTFE Lined Motorsport Fuel Line
The Teflon inner liner can withstand all types of fuel, including alcoholic fuels such as ethanol, methanol and racing fuels. Nuke Performance's PTFE fuel line has a much longer lifespan, as it does not degrade over time in the same way that standard nitrile rubber fuel line does. This will protect your injectors, fuel filters and in the long run your fuel pumps from getting stuck and damaged by the dissolved inside of nitrile fuel lines. The Nuke Performance PTFE fuel line is carbonized for conductivity, which is essential for motorsport fuel systems. The Nuke Performance Black Nylon Braided PTFE Lined Fuel Line is available in various sizes.
Black Nylon PTFE Stainless Braided Fuel Line : Find our range of PTFE Fuel Line here p>

• The PTFE Liner inside the fuel line acts as a vapor barrier
Nuke Performance PTFE Fuel Line has an internal Teflon (PTFE) ) liner that acts as a vapor barrier when running all types of fuel. This becomes especially useful when running alcoholic fuels, which otherwise often run through a traditional nitrile or rubber fuel line. This is handy when you want to run the fuel lines in the driver's compartment, as well as in your workshop between races and racing seasons.

• Outstanding flow capacity and extended motorsport life
The Nuke Performance Full Flow PTFE Series uses a full flow design that allows you to design your fuel system with minimal flow loss. With its three-layer design, it has a much smaller outer diameter than a standard nitrile fuel hose. The PTFE liner prevents the fuel line from hardening and will not crack or crack. This helps prevent fuel leakage and the odor that would occur when running a standard nitrile fuel hose.
AN-6 Full Flow PTFE Fuel Hose Part # : 820- 02-106 - 820-02-606
AN-8 Full Flow PTFE Fuel Hose Part # : 820-02-108 - 820-02-608 span>
AN-10 Full Flow PTFE Fuel Hose Part #: 820-02-110 - 820-02-610
AN-12 Full Flow PTFE Fuel Hose Part # : 820-02-112 - 820-02-612

• A wide variety of tools and accessories
To make your hose end and fuel installation as hassle-free as possible, Nuke Performance offers a wide range of practical fuel line fitting tools and accessories. The adjustable aluminum wrench with its V shape will revolutionize your hose end.
Adjustable Aluminum Wrench AN-4 to AN-16 Part # : 700-30 -105
Aluminum Screw Jaws for AN Coupling Part # : 700-30-201
AN Aluminum Wrenches AN -6/8/10/12 Part # : 700-30-101/2/3/4
Reserve Aluminum Olive insert Part # : 810-20-106/8 /10/12

Nuke Performance Full Flow PTFE Hose End Coupling available in AN-6, AN-8, AN-10 and AN-12. The matching braided PTFE fuel hose is available in pre-cut lengths of 1m, 2m, 4m and 6m (3-20ft).

• Nuke Performance PTFE Hose End / Fuel Hose Specifications
For more information on specifications, see the product manual.

• Download User Manual (.pdf)
• Accessories / Spare Parts
• Find Matching PTFE Fuel Hose
• How to Fit a PTFE Hose End (FAQ) p>