Drill a pilot hole, switch, and drive in the fastener, then do it again, and again, without ever switching out a bit. The Switchdriver is a two-headed drill/driver that gives you instant access to your two favorite bits at all times. You don’t need two separate drills lying around. And you don’t need to fumble with bits anymore. You can just rotate the head to the next bit when you have the Worx 20V Power Share Switchdriver 2-in-1. Plus, it’s packed with more features: 12 torque control settings let you select the perfect amount of torque for the job at hand, up to a max of 265 in-lbs. The 2-speed control enables you to go from 0-400 revs/min or 0-1500 revs/min. The max drilling capacity is 3/8” in steel and 1-3/16” for wood. And you can even rotate the head with one hand while you keep your other hand on the project. (You just squeeze the red dual chuck release button and use your thigh or forearm to push over the head to the next bit.) This Switchdriver doesn’t come with a battery, but that’s by design. It makes this model less-expensive because if you already have a Power Share battery or two at home, you don’t need to pay more for a tool with another battery. Power Share batteries are interchangeable with every tool on the platform.

Features

Item Weight	2.5
Color Family	Orange
Power Tool Features	Forward/Reverse Switch,Keyless Chuck
Drill/ Driver Type	Drill/ Driver
Included	Bits Included,Single Bit Included
Returnable	180-Day
Maximum Speed (RPM)	1500 RPM
Cordless/ Corded	Cordless
Battery Power Type	Lithium Ion
Charger Included	Charger Not Included
Tools Product Type	Power Tool
Cordless Tool Type	Specialty
Condition	New
Number of Batteries Included	0
Voltage (v)	20v
Chuck Type	Hex
Battery/Charger	Tool Only
Motor Type	Brushed
Product Weight (lb.)	2.5 lb
Chuck Size	1/4 In.
Product Height (in.)	8.2 in
Product Depth (in.)	9.7 in
Product Width (in.)	2.9 in
Certifications and Listings	ETL Listed
Manufacturer Warranty	3 years limited